Need Service? 905 738 1687 OR 1 866 838 6181 OR Request Service Online

SUB ZERO UNDERCOUNTER 200 SERIES

Download: Single Page Instructions | Full Manual

To expose the condenser, remove the kickplate at the base of the unit. To do this, remove the screws located at each corner of the kickplate. Use a "soft" bristle brush and vacuum hose to remove the accumulation of dust and lint particles on the condenser. IMPORTANT NOTE: Failure to properly clean this area could result in temperature lost and/or possible mechanical failure of the refrigerator and/or freezer.

SubZero 200 Series Guide