Need Service? 905 738 1687 OR 1 866 838 6181 OR Request Service Online


Download: Single Page Instructions | Full Manual

Clean the condenser area every three to six months. The cleaning schedule will depend on the amount of dust and lint that accumulates in this area. The condenser is located behind the kickplate. Remove the kickplate to expose the condenser area. Refer to the illustration below. Use a soft bristle brush and vacuum hose to remove dust and lint from the condenser area. To avoid bending the condenser fins, be sure to vacuum in the direction of the fins (up and down).

SubZero Ice Maker - 200 Series